Home
Products
Support
Become a Dealer
Company

Announcements
NeoPro Introduces NeoStar Fiber Optic Matrix

NeoPro releases Control4 drivers for all matrix switches

NeoPro Introduces Fiber Optic Product Line

Resources:
Integrator's Toolbox

Coax Cable Comparison

Serial Protocols

LightSpider™ - HD Video to Fiber Bridge with RS232, Audio, and IR

The LightSpider is an innovative fiber optic point to point bridge for long distance transport of HDMI, audio, RS232 serial data, and infrared signals. It can carry this set of signals up to 1,000 feet (305 meters) over a single strand of low cost multimode fiber cable.

The LightSpider is able to communicate all of these signals over a single strand of either 62.5/125 micron or 50/125 micron multimode fiber cable. No additional Cat5 or additional fibers are required to achieve full HD with HDCP encryption and EDID communications.

Rear Panel View

Features and Benefits

Go up to 1,000 feet without any concern of signal degradation, HDCP dropouts and errors, or video 'sparkles'.
Up to 1080p 60Hz at max length - no derating of video capabilities as your cable gets longer.
Full EDID communications - EDID display information is carried all the way through the system, so no need to 'copy' EDID or worry about it getting erased.
RS232 serial (bi-directional)- allows remote control of any display that has an RS232 control port. Great for power on/off control of projectors and flat panels.
IR backlink - allows the end user to use a universal IR remote at the display, and transport those IR codes back to the equipment.
Auxiliary analog audio - use for local amp w/in wall speakers, or support audio to the display when audio over HDMI is not available.

Specifications

Power Inlet: 9VDC with supplied power supply
Input Voltage: 90-240VAC 50-60Hz, 9W typical
Dimensions: Width: 8.6" (includes mounting flanges), Height: 1.6", Depth 4.9"
Weight: 0.9 lbs each unit
Digital audio modes over the HDMI port: PCM, LPCM, DD 5.1, DTS, up to 7.1 channels LPCM audio
Aux analog stereo transported at 96KHz/24bit
Aux audio bandwidth: 20 Hz to 20KHz at +/- 0.5dB
Video modes: 480p to 1080p 50/60Hz HDTV, up to 1920x1200 60Hz PC/DVI video
RS232 serial: 300 to 115.2K baud
Infrared backlink (cable kit optional): 38-40KHz
Fiber spec: LC to LC multimode 'simplex' cable; recommend 62.5/125 micron for 0-500 feet, 50/125 micron from 500 to 1,000 feet.

Cables and Termination

If you have experience with installing and terminating multimode LC fiber, great! We don't need you to do anything different.

However if you are new to fiber optics, we have a very easy to use kit for terminating fiber. With the AFL FAST™ LC Connector Tool Kit, you can terminate a fiber in minutes, no glue, no heater trays, no polishing. It's as easy as strip, cleave, insert and lock in place, then test. To see just how easy it is, follow this link to a video demo.

The AFL FAST™ LC Connector Tool Kit is available directly through Neothings.

In addition to kits and connectors, we also carry bulk cable (cut to length or spools), and premade cable assembies. Premade cable assemblies are currently available as 100', 200', 300', and 500'. Premade assemblies can also be special ordered. Contact us for details.

LightSpider product
cut sheet

LightSpider Installer's Guide